Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride.

In aluminum electrolysis, the iron-rich cover material is formed on the cover material and the steel rod connecting the carbon anode. Due to the high iron content in the iron-rich cover material, it differs from traditional cover material and thus requires harmless recycling and treatment. A process was proposed and used in this study to recovery F, Al, and Fe elements from the iron-rich cover material. This process involved aluminum sulfate solution leaching for fluorine recovery and alkali-acid synergistic leaching for α-Al2O3 and Fe2O3 recovery were obtained. The optimal leaching rates for F, Na, Ca, Fe, and Si were 93.92, 96.25, 94.53, 4.48, and 28.87%, respectively. The leaching solution and leaching residue were obtained. The leaching solution was neutralized to obtain the aluminum hydroxide fluoride hydrate (AHFH, AlF1.5(OH)1.5·(H2O)0.375). AHFH was calcined to form a mixture of AlF3 and Al2O3 with a purity of 96.14%. The overall recovery rate of F in the entire process was 92.36%. Additionally, the leaching residue was sequentially leached with alkali and acid to obtain the acid leach residue α-Al2O3. The pH of the acid-leached solution was adjusted to produce a black-brown precipitate, which was converted to Fe2O3 under a high-temperature calcination, and the recovery rate of Fe in the whole process was 94.54%. Therefore, this study provides a new method for recovering F, Al, and Fe in iron-rich cover material, enabling the utilization of aluminum hazardous waste sources.

Comparison of Marginal Adaptation, Surface Hardness and Bond Strength of Resected and Retrofilled Calcium Silicate-based Cements Used in Endodontic Surgery: An In Vitro Study.

AIMS: This study compared the effects of orthograde and retrograde methods on marginal adaptation, surface hardness, and push-out bond strength (POBS) of three calcium silicate-based used in endodontic surgery. MATERIALS AND METHODS: Ninety single-rooted human mandibular premolars were randomly assigned into six groups (n = 15/group): groups I and II, ProRoot mineral trioxide aggregate (MTA) with orthograde and retrograde methods; groups III and IV, Biodentine (BD) with orthograde and retrograde methods; groups V and VI, iRoot BP Plus (BP-RPM) with orthograde and retrograde methods. After obturation, the apical 3 mm of each root was sectioned into two 1-mm-thick root slices and evaluated for marginal adaptation using a scanning electron microscope, surface hardness using Vickers hardness tester and POBS using a universal testing machine. RESULTS: Orthograde placement had a higher maximum gap width than retrograde placement (p < 0.05), but there was no significant difference among the tested materials (p > 0.05). Biodentine exhibited lower surface hardness than ProRoot MTA and iRoot BP Plus (p < 0.05), but there was no significant difference between ProRoot MTA and iRoot BP Plus (p > 0.05). Orthograde placement had higher POBS compared with retrograde placement (p < 0.05). Biodentine had higher POBS than iRoot BP Plus (p < 0.05), but no significant difference from ProRoot MTA (p > 0.05). The failure mode was mainly mixed for all the tested materials regardless of material type or placement technique. CONCLUSION: The retrograde method had better marginal adaptation; however, the orthograde method provided better dislodgement resistance. Biodentine had lower surface hardness than MTA and iRoot BP Plus with both techniques, whereas iRoot BP Plus demonstrated lower dislodging resistance than BD. CLINICAL SIGNIFICANCE: The current findings suggest that orthograde technique, a simpler periapical surgery, with ProRoot MTA provides potentially better surface hardness and POBS than BD and iRoot BP Plus in single-canal teeth.

Nicotine-magnesium aluminum silicate complexes processed by blending: Characterization for usage as drug carriers in mucoadhesive buccal discs.

Complexation of nicotine (NCT) and magnesium aluminum silicate (MAS) has been formed in the dispersions that required multiple preparation steps. In this study, physical blending was used to produce NCT-MAS complexes. NCT, a free-base liquid state form, was adsorbed onto the MAS granules, where the diffusion and intercalation of NCT molecules into the MAS silicate layers occurred. These processes required a minimum of the 7-d-resting period to reach NCT complete distribution. FTIR, XRD, and 29Si NMR suggest that NCT could interact with MAS via hydrogen bonding, water bridging, and ionic electrostatic force. The 12 % NCT-MAS complexes enabled a sustained release of NCT, after a 2-min burst, in pH 6 phosphate buffer through a particle diffusion-controlled mechanism. Buccal discs formulated with NCT-MAS complexes and sodium alginate (SA) as drug carriers and matrix former could control NCT released through drug diffusion and swelling-controlled mechanisms. NCT release and membrane permeation increased with increasing NCT-MAS complexes or decreasing SA concentration. All NCT-MAS-containing buccal discs exhibited mucoadhesive properties related to the swelling characteristics of SA and MAS. Conclusively, NCT-MAS complexes can be produced through an uncomplicated single-step blending process, and the complexes obtained presented a potential to serve as drug carriers in buccal matrix formulations.

Biocompatibility, bioactive potential, porosity, and interface analysis calcium silicate repair cements in a dentin tube model.

OBJECTIVES: This study is to evaluate biocompatibility, bioactive potential, porosity, and dentin/material interface of Bio-C Repair (BIOC-R), MTA Repair HP (MTAHP), and Intermediate Restorative Material (IRM). MATERIALS AND METHODS: Dentin tubes were implanted into subcutaneous of rats for 7, 15, 30, and 60 days. Thickness of capsules, number of inflammatory cells (ICs), interleukin-6 (IL-6), osteocalcin (OCN), and von Kossa were evaluated. Porosity and material/dentin interface voids were also analyzed. Data were submitted to ANOVA and Tukey's tests (p < 0.05). RESULTS: IRM capsules were thicker and contained greater ICs and IL-6-immunopositive cells at 7 and 15 days. BIOC-R capsules exhibited higher thickness and ICs at 7 days and greater IL-6 at 7 and 15 days than MTAHP (p < 0.05). At 30 and 60 days, no significant difference was observed among the groups. OCN-immunopositive cells, von Kossa-positive, and birefringent structures were observed in BIOC-R and MTAHP. MTAHP exhibited higher porosity and interface voids (p < 0.05). CONCLUSIONS: BIOC-R, MTAHP, and IRM are biocompatible. Bioceramics materials demonstrate bioactive potential. MTAHP presented the highest porosity and presence of voids. CLINICAL RELEVANCE: BIOC-R and MTAHP have adequate biological properties. BIOC-R demonstrated lower porosity and presence of voids, which may represent better sealing for its clinical applications.

Biocompatibility and bioactive potential of an experimental tricalcium silicate-based cement in comparison with Bio-C repair and MTA Repair HP materials.

AIM: To evaluate the tissue reaction of a tricalcium silicate-based repair material associated with 30% calcium tungstate (TCS + CaWO4 ) in comparison to Bio-C Repair (Bio-C; Angelus) and to MTA Repair HP (MTA HP; Angelus). METHODOLOGY: Polyethylene tubes filled with one of the materials or left empty (control group, CG) were implanted into the subcutaneous tissues of rats for 7, 15, 30 and 60 days (n = 32/group). The capsule thickness, number of inflammatory cells, collagen content, interleukin-6 (IL-6), osteocalcin (OCN), von Kossa reaction and analysis under polarized light were evaluated. The data were subjected to generalized linear models for repeated measures, except the OCN. OCN data were submitted to Kruskal-Wallis and Dunn's post hoc test and Friedman followed by Nemenyi's test at significance level of 5%. RESULTS: At all time points, significant differences in the number of inflammatory cells were not observed between TCS + CaWO4 and Bio-C, whereas, at 15, 30 and 60 days, no significant difference was detected between TCS + CaWO4 and MTA HP. At all periods, significant differences were not detected in the number of fibroblasts in TCS + CaWO4 versus MTA HP, and, at 60 days, no significant difference was demonstrated between these groups and CG. Significant differences in the immunoexpression of IL-6 were not detected amongst bioceramic materials at all periods. From 7 to 60 days, significant reduction in the number of inflammatory cells, number of IL-6-immunopositive cells and in the capsule thickness was accompanied by significant increase in the collagen in all groups. OCN-immunolabelled cells, von Kossa-positive structures and amorphous calcite deposits were observed around all materials, whereas, in the CG, these structures were not seen. CONCLUSIONS: These findings indicate that the experimental material (TCS + CaWO4 ) is biocompatible and has a bioactive potential, similar to the MTA HP and Bio-C Repair, and suggest its use as a root repair material.

Physico-chemical properties of aluminum adjuvants in vaccines: Implications for toxicological evaluation.

Aluminum salts have been used as adjuvants in human vaccines since 1932. The most used adjuvants are Al oxyhydroxide (AlOOH) and Al hydroxyphosphate (AlOHPO4). Al adjuvants have different physico-chemical properties. The differences in these properties are not well documented and not considered by the Food and Drug Administration (FDA), though they can largely influence biological effects of the adjuvants which are particulate components. In this study, different physico-chemical properties including the shape, size and charge of particles have been evaluated under different conditions in three Al adjuvants containing-vaccines and two corresponding commercial adjuvants suspensions. The results showed that the two Al adjuvants have different shapes, sizes and charges but both form aggregates. In addition, a clear effect of dilution on the size of the aggregates was observed. Moreover, different sizes of Al particles were measured for both Al oxyhydroxide adjuvant alone or in the vaccine, at identical concentrations, displaying the impact of adsorbed proteins on the size of aggregates in the case of the vaccine. Taken together, this paper suggests the importance to evaluate, before any biological and especially toxicological impact study, the whole physico-chemical properties of Al particle without restricting to the sole evaluation of the injected concentration. Furthermore, any modification of these mentioned parameters during manipulation, before animal or cell exposure, should be considered. In a more global way, the fixed "safe dose" of Al adjuvants should be specific for each type of Al adjuvant independently or for a mix of the two compounds, due to their different properties.

Treatment of critical aluminum phosphide (rice tablet) poisoning with high-dose insulin: a case report.

BACKGROUND: Aluminum phosphide (rice tablet) is a highly efficient agent for preserving grains against rodents and insects. It accounts for a large number of poisoning cases. Aluminum phosphide poisoning has a high mortality rate of about 90%, and to date, no antidote is available. It releases phosphine gas after exposure to moisture, and this reaction is catalyzed by the acidity of the stomach. Phosphine is then absorbed throughout the respiratory or gastrointestinal tracts and causes toxicity through inhibition of cytochrome c oxidase and formation of highly reactive free radicals. Treatment of patients with aluminum phosphide poisoning is supportive, including mechanical ventilation and vasopressors. The usage of infusion of glucose-insulin-potassium in rice tablet poisoning has been suggested, after its positive beneficial cardiac inotropic effects in patients with beta-blocker and calcium channel blocker poisoning. CASE PRESENTATION: We report the case of a 30-year-old Iranian woman with critical aluminum phosphide poisoning, presented with hypotension and other signs of shock and severe metabolic acidosis, successfully treated with high-dose regular insulin and hypertonic dextrose and discharged from hospital in good condition. In contrast to our previous experiences, in which nearly all patients with critical aluminum phosphide poisoning died, this patient was saved with glucose-insulin-potassium. CONCLUSION: Aluminum phosphide poisoning has a high mortality rate, and to date, no antidote is available. Administration of high-dose intravenous regular insulin and dextrose is suggested as a potential life-saving treatment for patients with critical aluminum phosphide poisoning.

Al3+ solvation in solutions of aluminum nitrate in a protic ionic liquid: Nuclear magnetic resonance verification of the solvation shell composition.

The closest environment of Al3+ cations was analyzed in detail in solutions of aluminum nitrate in the prototypical protic ionic liquid ethyl ammonium nitrate (EAN) using 1 H and 14 N nuclear magnetic resonance (NMR) spectra. For Al (NO3 )3 -EAN mixtures with different water content, a quantitative analysis of the integral intensities of the 1 H and 14 N signals was carried out and the composition of the first solvation shell of the aluminum cation was refined.

Counterions determine uptake and effects of aluminum in human intestinal and liver cells.

Aluminum (Al) is highly abundant in the biosphere and can occur in different physico-chemical states. It is present in human food and undergoes transitions between dissolved and particulate species during the passage of the gastrointestinal tract. Moreover, in a complex matrix such as food different inorganic and organic counterions can affect the chemical behavior of Al following oral uptake. In this work, the effects of different counterions, namely chloride, citrate, sulfate, lactate and acetylacetonate, on Al uptake and toxicity in the human intestine are studied. The respective Al salts showed different dissolution behavior in biological media and formed nanoscaled particles correlating in reverse with the amount of their dissolved fraction. The passage through the intestinal barrier was studied using a Caco-2 Transwell® system, showing counterion-dependent variance in cellular uptake and transport. In addition, Al toxicity was investigated using Al species (Al3+, metallic Al0 and oxidic γAl2O3 nanoparticles) and counterions individually or in mixtures on Caco-2 and HepG2 cells. The strongest toxicity was observed using a combination of Al species, depending on solubility, and the lipophilic counterion acetylacetonate. Notably, only the combination of both led to toxicity, while both substances individually did not show toxic effects. A toxification of previously non-toxic Al-species by the presence of acetylacetonate is shown here for the first time. The dependency on the concentration of free Al ions was demonstrated using sodium hydrogen phosphate, which was able to counteract the toxic effects by complexing free Al ions. These findings, using Al salts as an example for a common food contaminant, underline the importance of a consideration of the chemical properties of human nutrition, especially dissolution and hydrophobicity, which can significantly influence the cellular uptake and effects of xenobiotic substances.

Spectroscopic glimpses of the transition state of ATP hydrolysis trapped in a bacterial DnaB helicase.

The ATP hydrolysis transition state of motor proteins is a weakly populated protein state that can be stabilized and investigated by replacing ATP with chemical mimics. We present atomic-level structural and dynamic insights on a state created by ADP aluminum fluoride binding to the bacterial DnaB helicase from Helicobacter pylori. We determined the positioning of the metal ion cofactor within the active site using electron paramagnetic resonance, and identified the protein protons coordinating to the phosphate groups of ADP and DNA using proton-detected 31P,1H solid-state nuclear magnetic resonance spectroscopy at fast magic-angle spinning > 100 kHz, as well as temperature-dependent proton chemical-shift values to prove their engagements in hydrogen bonds. 19F and 27Al MAS NMR spectra reveal a highly mobile, fast-rotating aluminum fluoride unit pointing to the capture of a late ATP hydrolysis transition state in which the phosphoryl unit is already detached from the arginine and lysine fingers.

MMP-2-Activatable Photoacoustic Tumor Imaging Probes Based on Al- and Si-Naphthalocyanines.

Enzyme-activatable photoacoustic probes are powerful contrast agents to visualize diseases in which a specific enzyme is overexpressed. In this study, aluminum and silicon naphthalocyanines (AlNc and SiNc, respectively) conjugated with matrix metalloprotease-2 (MMP-2)-responsive PLGLAG peptide sequence and poly(ethylene glycol) (PEG) as an axial ligand were designed and synthesized. AlNc-peptide-PEG conjugates AlNc-pep-PEG formed dimeric species interacting with each other through face-to-face H-aggregation in water, while SiNc-based conjugates SiNc-pep-PEG hardly interacted with each other because of the two bulky hydrophilic axial ligands. Both conjugates formed spherical nanometer-sized self-assemblies in water, generating photoacoustic waves under near-infrared photoirradiation. The treatment of MNc-peptide-PEG conjugates (M = Al, Si) with MMP-2 smoothly induced the cleavage of the PLGLAG sequence to release the hydrophilic PEG moiety, resulting in the aggregation of MNcs. By comparing the PA signal intensity changes at 680 and 760 nm, the photoacoustic signal intensity ratios were shown to be enhanced by 3-5 times after incubation with MMP-2. We demonstrated that MNc-peptide-PEG conjugates (M = Al, Si) could work as activatable photoacoustic probes in the in vitro experiment of MMP-2-overexpressed cell line HT-1080 as well as the in vivo photoacoustic imaging of HT-1080-bearing mice.

Study on aluminum nitride/addition-cure liquid silicone rubber composite for high-voltage power encapsulation.

In view of the development direction of high power and miniaturization of high-voltage power supply, higher requirements are put forward for the breakdown strength, thermal conductivity of packaging materials for its high voltage output module. An electric-insulated heat-conducted material with aluminium nitride as heat conducting filler and addition-cure liquid silicone rubber (ALSR) as matrix for high voltage power encapsulation has been studied. Initially, the thermal conductivity and breakdown strength of composites were explored at different filler fractions. With increase of filler fraction, the thermal conductivity increased and the breakdown strength decreased. Then, with the packaging module volume as the optimization objective and the working temperature as the optimization condition, the temperature distribution of high voltage power supply was studied by using the finite element method, and 40wt% filling fraction was selected as the optimal ratio. Finally, the actual packaging experiment of the high voltage module is carried out. and the variation of the output voltage and temperature with the working time is obtained. According to the experimental results, the output voltage of the high voltage module is basically stable, and the maximum surface temperature is 40.4°C. The practicability of the electric-insulated heat-conducted material has been proved.

Investigation of characteristics as endodontic sealer of novel experimental elastin-like polypeptide-based mineral trioxide aggregate.

Although mineral trioxide aggregates (MTA) have been adopted as an endodontic sealer because of excellent sealing effect and bioactive property and been modified with improvement of its characteristics, the developed MTA sealers have not yet satisfied all the ideal requirements of endodontic sealers. The aim of this study was to assess the characteristics of elastin-like polypeptide (ELP)-incorporated MTA for use as an endodontic sealer and compare them with those of commercial MTA sealers. Two commercial MTA sealers and three experimental ELP-incorporated MTA sealers with 0.3, 0.4, and 0.5 liquid/powder (L/P) ratio for 10 wt% ELP liquid were evaluated. The push-out bond strength, flow rate, sealer penetrability and wash-out resistance were tested and the sealer-dentin interface was observed using a scanning electron microscope (SEM). Our study revealed the ELP-incorporated MTA sealer, especially in 0.4 L/P ratio, exhibited the higher push-out bond strength and flow rate (P < 0.05), and equal or superior sealer penetration and remarkable wash-out resistance compared to commercial MTA sealers. The groups of ELP-based experimental sealers also exhibited more intimate contact with dentin compared to the commercial MTA sealers. Our research will suggest the possible adoption of the ELP-incorporated MTA as endodontic sealer for clinical use.

Flexible and reusable carbon dot decorated natural microcline membrane: a futuristic probe for multiple heavy metal induced carcinogen detection.

A flexible nano-engineered natural mineral (carbon dot doped natural microcline) based membrane (MCPV) has been developed, which can efficiently detect the presence of hexavalent chromium (Cr6+) and trivalent iron (Fe3+) ions in water by altering its fluorescence emission. Detailed characterization of the membrane was carried out using XRD, FT-IR spectroscopy, FESEM, TEM, and UV-Vis spectroscopy. Mechanical and temperature stabilities were also investigated. This new-generation sensor membrane is designed in such a way that it does not dissolve in water, keeping the water quality unaffected. The fluorescence studies were conducted at 414 nm and "turn-off" response was observed specifically for Fe3+ at 489 nm. A prominent red shift (530 nm) of the fluorescence maxima takes place when it comes to Cr6+. Figures of merit, such as LOD (8.7 µM for Cr6+ and 18.4 µM for Fe3+) and LOQ (29.1 µM for Cr6+ and 61.6 µM for Fe3+), were evaluated from the linear range (0-60 µM for Cr6+ and 0-30 µM for Fe3+) of the calibration curve (Stern-Volmer plots) showing high sensitivity of this sensing probe toward Cr6+ and Fe3+. Recovery and RSD calculations were done in various real-life water samples on intraday-interday basis to determine the accuracy of the sensor. This work validates the fact that the synthesized sensor membrane is capable of detecting these heavy metals in glutathione environment as well, which could be beneficial for early-stage carcinogen detection in living cells.

Design and in vitro antibiofilm activity of propolis diffusion-controlled biopolymers.

In this study, a novel pH-sensitive hydrogel beads that is based on gelatin/sodium alginate/chitosan (GEL/SA/CS) loaded with propolis ethanolic extracts (PE) were synthesized. The swelling behavior of GEL/SA/CS hydrogel beads was studied in different pH solutions and compared with unloaded CS (GEL/SA) hydrogel beads. The in vitro release studies have been revealed using four different pH (1.3, 5.0, 6.0, and 6.8), a saliva environment (pH 6.8), a simulated gastric fluid (SGF) (pH 1.3), and a simulated intestinal fluid (SIF) (pH 6.8) to simulate the physiological conditions in gastrointestinal (GI) tract. Propolis-loaded hydrogel beads were found to be stable at pH 1.3, 5.0, 6.0, simulated saliva, SGF, and SIF mediums, whereas the beads lose their stability at pH 6.8 buffer solution. Tested microorganisms displayed greater sensitivity to PE-loaded hydrogel beads compared with pure propolis. Contrary to antimicrobial activity results, antibiofilm activity results of PE-loaded GEL/SA and GEL/SA/CS hydrogel beads were found at low levels. According to the obtained results, the propolis-loaded GEL/SA/CS hydrogel beads synthesized within this study can be used in the treatment of GI tract diseases such as oral mucositis, gastric ulcer, ulcerative colitis, and GI cancer, as controlled releasing carriers of propolis.

FAPI-74 PET/CT Using Either 18F-AlF or Cold-Kit 68Ga Labeling: Biodistribution, Radiation Dosimetry, and Tumor Delineation in Lung Cancer Patients.

68Ga-fibroblast activation protein inhibitors (FAPIs) 2, 4, and 46 have already been proposed as promising PET tracers. However, the short half-life of 68Ga (68 min) creates problems with manufacture and delivery. 18F (half-life, 110 min) labeling would result in a more practical large-scale production, and a cold-kit formulation would improve the spontaneous availability. The NOTA chelator ligand FAPI-74 can be labeled with both 18F-AlF and 68Ga. Here, we describe the in vivo evaluation of 18F-FAPI-74 and a proof of mechanism for 68Ga-FAPI-74 labeled at ambient temperature. Methods: In 10 patients with lung cancer, PET scans were acquired at 10 min, 1 h, and 3 h after administration of 259 ± 26 MBq of 18F-FAPI-74. Physiologic biodistribution and tumor uptake were semiquantitatively evaluated on the basis of SUV at each time point. Absorbed doses were evaluated using OLINDA/EXM, version 1.1, and QDOSE dosimetry software with the dose calculator IDAC-Dose, version 2.1. Identical methods were used to evaluate one examination after injection of 263 MBq of 68Ga-FAPI-74. Results: The highest contrast was achieved in primary tumors, lymph nodes, and distant metastases at 1 h after injection, with an SUVmax of more than 10. The effective dose per a 100-MBq administered activity of 18F-FAPI-74 was 1.4 ± 0.2 mSv, and for 68Ga-FAPI-74 it was 1.6 mSv. Thus, the radiation burden of a diagnostic 18F-FAPI-74 PET scan is even lower than that of PET scans with 18F-FDG and other 18F tracers; 68Ga-FAPI-74 is comparable to other 68Ga ligands. FAPI PET/CT supported target volume definition for guiding radiotherapy. Conclusion: The high contrast and low radiation burden of FAPI-74 PET/CT favor multiple clinical applications. Centralized large-scale production of 18F-FAPI-74 or decentralized cold-kit labeling of 68Ga-FAPI-74 allows flexible routine use.

ATP Analogues for Structural Investigations: Case Studies of a DnaB Helicase and an ABC Transporter.

Nucleoside triphosphates (NTPs) are used as chemical energy source in a variety of cell systems. Structural snapshots along the NTP hydrolysis reaction coordinate are typically obtained by adding stable, nonhydrolyzable adenosine triphosphate (ATP) -analogues to the proteins, with the goal to arrest a state that mimics as closely as possible a physiologically relevant state, e.g., the pre-hydrolytic, transition and post-hydrolytic states. We here present the lessons learned on two distinct ATPases on the best use and unexpected pitfalls observed for different analogues. The proteins investigated are the bacterial DnaB helicase from Helicobacter pylori and the multidrug ATP binding cassette (ABC) transporter BmrA from Bacillus subtilis, both belonging to the same division of P-loop fold NTPases. We review the magnetic-resonance strategies which can be of use to probe the binding of the ATP-mimics, and present carbon-13, phosphorus-31, and vanadium-51 solid-state nuclear magnetic resonance (NMR) spectra of the proteins or the bound molecules to unravel conformational and dynamic changes upon binding of the ATP-mimics. Electron paramagnetic resonance (EPR), and in particular W-band electron-electron double resonance (ELDOR)-detected NMR, is of complementary use to assess binding of vanadate. We discuss which analogues best mimic the different hydrolysis states for the DnaB helicase and the ABC transporter BmrA. These might be relevant also to structural and functional studies of other NTPases.

MIL-53(Al)/Fe2O3 nanocomposite for solid-phase microextraction of organophosphorus pesticides followed by GC-MS analysis.

A novel aluminum terephthalate/Fe2O3 nanocomposite was synthesized by the addition of Fe2O3 nanoparticles into a reaction solution containing aluminum terephthalate MOF. The synthesized nanocomposite was successfully used as a fiber coating material for solid-phase microextraction (SPME) of six organophosphorus compounds (OPPs) from river water, grape juice, and tea samples. The effect of different parameters on the efficiency of SPME including desorption temperature and time, extraction temperature and time, salt concentration, pH, and agitation were thoroughly studied. The OPPs were detected and determined using GC-MS. According to the findings, a wide linear range (0.15-800 µg kg-1), low limit of detection (0.04-10 µg kg-1), and high recoveries from spiked samples (87.5-112%) were achieved with low inter-day relative standard deviation (3.2-6.7%, n = 5). The MIL-53(Al)/Fe2O3 nanocomposite showed  a high extraction ability towards OPPs, and hence, it can be considered a promising adsorbent for the extraction of various pesticides in complex matrices like tea and juice.Graphical abstract.

Potential application of pristine and Al-doped graphyne-like BN nanosheet for detection of anticancer fluorouracil drug.

We studied the potential application of the pristine and Al-doped graphyne-like BN nanosheets (Al-BN-yne) in 5-fluorouracil (5-FU) drug detection using DFT calculations. The 5-FU drug preferentially adsorbed via its oxygen atom on the B atom of pristine BN-yne with adsorption energy of - 11.7 kcal/mol and no effect on its electronic properties. Replacing a B atom by an Al atom significantly increased the sensitivity and reactivity of BN-yne to the 5-FU drug. Upon the 5-FU interaction with the Al-BN-yne, an energy of 20.3 kcal/mol is released, and the Eg of Al-BN-yne significantly decreased from 4.83 to 3.80 eV, increasing the electrical conductance. Thus, the Al-BN-yne sheet can generate an electronic signal after the 5-FU drug adsorption, being a promising electronic sensor for 5-FU detection. We predicted that the recovery time for 5-FU drug desorption from the Al-BN-yne sheet surface is 0.07 s, demonstrating that it benefits from a short recovery time.

The Effects of an Albumin Binding Moiety on the Targeting and Pharmacokinetics of an Integrin αvß6-Selective Peptide Labeled with Aluminum [18F]Fluoride.

PURPOSE: The αvß6-BP peptide selectively targets the integrin αvß6, a cell surface receptor recognized as a prognostic indicator for several challenging malignancies. Given that the 4-[18F]fluorobenzoyl (FBA)-labeled peptide is a promising PET imaging agent, radiolabeling via aluminum [18F]fluoride chelation and introduction of an albumin binding moiety (ABM) have the potential to considerably simplify radiochemistry and improve the pharmacokinetics by increasing biological half-life. PROCEDURES: The peptides NOTA-αvß6-BP (1) and NOTA-K(ABM)-αvß6-BP (2) were synthesized on solid phase, radiolabeled with aluminum [18F]fluoride, and evaluated in vitro (integrin ELISA, albumin binding, cell studies) and in vivo in mouse models bearing paired DX3puroß6 [αvß6(+)]/DX3puro [αvß6(-)], and for [18F]AlF 2, BxPC-3 [αvß6(+)] cell xenografts (PET imaging, biodistribution). RESULTS: The peptides were radiolabeled in 23.0 ± 5.7 % and 22.1 ± 4.4 % decay-corrected radiochemical yield, respectively, for [18F]AlF 1 and [18F]AlF 2. Both demonstrated excellent affinity and selectivity for integrin αvß6 by ELISA (IC50(αvß6) = 3-7 nM vs IC50(αvß3) > 10 µM) and in cell binding studies (51.0 ± 0.7 % and 47.2 ± 0.7 % of total radioactivity bound to DX3puroß6 cells at 1 h, respectively, vs. ≤ 1.2 % to DX3puro for both compounds). The radiotracer [18F]AlF 1 bound to human serum at 16.3 ± 1.9 %, compared to 67.5 ± 1.0 % for the ABM-containing [18F]AlF 2. In vivo studies confirmed the effect of the ABM on blood circulation (≤ 0.1 % ID/g remaining in blood for [18F]AlF 1 as soon as 1 h p.i. vs. > 2 % ID/g for [18F]AlF 2 at 6 h p.i.) and higher αvß6(+) tumor uptake (4 h: DX3puroß6; [18F]AlF 1: 3.0 ± 0.7 % ID/g, [18F]AlF 2: 7.2 ± 0.7 % ID/g; BxPC-3; [18F]AlF 2: 10.2 ± 0.1 % ID/g). CONCLUSION: Both compounds were prepared using standard chemistries; affinity and selectivity for integrin αvß6 in vitro remained unaffected by the albumin binding moiety. In vivo, the albumin binding moiety resulted in prolonged circulation and higher αvß6-targeted uptake.